Retour au site VCE405 PENTXM PENTXM2 Soon VMPC7 VxG4c PowerNode3 PowerNode5 Processor IBM PowerPC 405GP  Pentium M Processor  Dual-Core Xeon  1 or 2 PowerPC 750FX  2 or 4 PowerPC 7410 (G4)  1 or 2 PowerPC 7457 (G4+)  2 PowerPC 970FX  Clock Frequency 266 MHz or 400 MHz  1,6 GHz or 1,8 GHz  1,67 GHz  700, 733 or 1000 MHz  466 / 450 MHz   1 GHz  1,6 GHz  MIPS       up to 2300 DMIPS @ 1 GHz  730 & 3600 Mflop at 466 MHz per processor  7.4 Gflops per processeur  12 Gflops per processeur  Global memory 64 or 128 MB  1 GB  4 GB 400 MHz DDR2-SDRAM  128, 256, 512 MB on board  128, 256, 512 MB on board  128, 256, 512 MB, or 1GB on board  512 MB,1 GB or 2GB on board  ECC       Standard  Standard  Standard  Standard  Cache memory 266 MHz: 16 KB instructional cache, 8 KB data cache 400 MHz: 16 KB instructional cache, 16 KB data cache  64 KB Primary, 1 MB Secondary    Fast 512 KB L2 Cache Memory  2 MB per processor  2 MB per processor + optional 2 MB private SRAM (on dedicated bus)    ROM memory 8 or 16 MB  512 KB of BIOS; 64 MB Application Flash    up to 128 MB User Flash  512 KB + 1 MB System Flash Memory up to 32 MB User Flash  2 MB System Flash Memory Up to 64 MB User Flash  8 MB System Flash Memory 128 MB User Flash  VME INTERFACE • A32/A24/A16 master slave • D64:MBLT/D32, D32:BLT, D32:UAT/D16, D16:UAT/D08 master/slave • D32:RMW/D16:RMW/D08:RMW slave  A32/A24/A16 D08 (EO) /D16/D16BLTD32/D64/D32BLT/D64BLT(MBLT) Arbiter 4-level priority or round robin arbiter andAuto-SYSCON Requester Fair, ROR, or RWD    . ALMA2e V64 VME/PCI bridge with semaphore registers . ALMA2e V64 VME/PCI bridge with semaphore registers . D64 (MBLT) / D32 (BLT) / D16 / D08 master / slave . 5-row connectors . 2eSST enhancements  * ALMA V64 and 2eSST VME/PCI bridge with semaphore register * A32 / A24 /A16 master / slave * D64 (MBLT) / D32 (BLT) / D16 / D08 master / slave * 5-row connectors   * ALMA2e V64 and 2eSST VME/PCI bridge with semaphore register * A32 / A24 /A16 master / slave * D64 (MBLT) / D32 (BLT) / D16 / D08 master / slave * 5-row connectors   * ALMA2e D64 and 2eSST VME/PCI bridge with semaphore register * A32 / A24 /A16 master / slave * D64 (MBLT) / D32 (BLT) / D16 / D08 master / slave * 5-row connectors   PCI INTERFACE • 32- or 64-bit PCI @ 33 or 66 MHz • Two 3.3V or 5V, 32-bit IEEE P1386.1-compliant slots with front-panel or P2 I/O  32/64-bit, 33/66 MHz, 3.3V or 5V  PMC 1 PCI-Express connectivity XMC/PMC (x8 link) 64/66 MHz PMC 2 * PCI Rev. 2 compliant ( 64-bit) * 1 PMC slot * 66 MHz   PCI revision 2 compliant PMC 1 * PCI 32-bit/33 MHz, 3.3V and 5V signaling build option PMC 2 * PCI 64-bit/33 or 66 MHz selectable, *3.3V signaling (33 MHz in extended temperature versions)  PMC 1 * PCI Rev. 2 compliant (32 bits) 5V & 3.3V signaling * 1 PMC slot * 33 MHz frequency (44 MHz option available) * DMA engine : DRAM <-> PCI PMC 2 * PCI Rev. 2 compliant (32 / 64-bit) 3.3V signaling * 1 PMC slot (up to 3 with carrier card) * 33 or ailable') rem resultat : OK   PMC 1 * PCI Rev. 2 compliant (32 bits) 5V & 3.3V signaling * 1 PMC slot * 33 MHz frequency (44 MHz option available) * DMA engine : DRAM <-> PCI PMC 2 * PCI Rev. 2 compliant (32 / 64-bit) 3.3V signaling * 1 PMC slot (up to 3 with carrier card) * 33 or ailable') rem resultat : OK   PMC 1 * PCI -X compliant * 1 PMC slot * 100 MHz frequency   HDD Interface NA  External IDEPrimary & secondary IDE interfaces  Dual SATA-150 ports on rear P0  SCSI 8/16 bits, 40Mbytes/s  NA  NA  EIDE through P2 connector  ETHERNET Interface • 10/100BASE-T via RJ-45 connector on the front panel  Two 10/100/1000BASE-T channels  Dual Ethernet 10/100/1000 ports onx4 PCI-Express (SW configurable on front RJ45 or rear P0 VITA 31compliant)  2 x Ethernet interface * 1 x 10/100/1000 Base-T * 1 x 10/100 Base-T  * On-board 10/100 Mbps Ethernet  2 x 10/100/1000 Ethernet Ports  2 x 10/100/1000 Ethernet Ports  MISCELLANEOUS • 2 asynchronous EIA-232 serial ports • 4 sync/async EIA-232/422/485 ports  VideoUp to 16M colors, 2048x1536@75 Hz Serial PortsThree: one EIA-232 andtwo EIA-232/422/485 USB : One or two USB 2.0 interfaces  Triple USB 2.0 ports, one on front, dual on real P0  . 4 async. serial lines . Optional 2 ESCC sync./async. serial lines on rear panel  * 4 asynchronous EIA-232 serial lines on front panel * 4 EIA-232 (optional) on P2 (no modem signals)  * 4 asynchronous EIA-232 serial lines on front panel * 2 EIA-422/485 (optional) on P2 (no modem signals)  * Three 4x RapidIO links through P0 * 2 asynchronous EIA-232 serial lines on front panel and P2   POWER Requirements +5V (+5%, -2.5%): 1.5A +12V for flash memory pro-gramming and PMC site -12V for PMC site only  +5V: 5A typical +5V; +12V/-12V for PMC site only  5A, + 5 VDC 8A, + 3.3 VDC  +5V (+5%, -2.5%) Single : 2.9A / 14.4W Dual : 3.2A / 16.0W  + 5V (+5%, -2,5%) Dual : 2.5 A ; Quad : 6.2 A + 3,3V (+5%, -2,5%) Dual : 2.0 A ; Quad : 2.4 A (requires 3.3 V supply from backplane)  + 5V (+5%, -2,5%) Single : 1.8 A ; Dual : 4.0 A + 3,3V (+5%, -2,5%) Single : 3.6 A ; Dual : 3.55 A (requires 3.3 V supply from backplane)  75 W  Environmental specification               operating SA : 0 to +55°C ; WA : -20 to + 65°C RA : -40 to +75°C ; RC : -40 to +85°C  SA : 0 to +55°C ; WA : -20 to + 65°C RA : -40 to +75°C ; RC : -40 to +85°C  S : 0 to +55°C ; RC : -40 to +85°C  SA : 0 to +55°C ; WA : -20 to + 65°C RA : -40 to +75°C ; RC : -40 to +85°C  S : 0 to +55°C ; W : -20 to + 65°C RA : -40 to +75°C ; RC : -40 to +85°C  S : 0 to +55°C ; W : -20 to + 65°C RA : -40 to +75°C ; RC : -40 to +85°C  S : 0 to +55°C ; RC : -40 to +85°C  storage SA / WA : -40 to + 85°C RA / RC : -45 to + 100°C  SA / WA : -40 to + 85°C RA / RC : -45 to + 100°C  S : -45 to + 85°C RC : -45 to + 100°C  SA / WA : -40 to + 85°C RA / RC : -45 to + 100°C  S / W : -45 to + 85°C RA / RC : -45 to + 100°C  S / W : -45 to + 85°C RA / RC : -45 to + 100°C  S : -45 to + 85°C RC : -45 to + 100°C    VCE405 PENTXM PENTXM2 Soon VMPC7 VxG4c PowerNode3 PowerNode5   Datasheet Datasheet   Datasheet Datasheet Datasheet